XSPC RS360 Radiator

Posted: March 27, 2012 in Radiators
Tags: , , ,

Photos

Here is the package unboxed.  The radiator came wrapped in bubble wrap, and the screw package was protected in a piece of cardboard, so very good packaging protection.

Basic Radiator Essentials.  You get the rad with port plugs, 12ea screws for 25mm fans on one side and 12ea short screws for mounting….and the obligatory screw puncture warning which is important to take caution on.  I have poked a few holes in radiators in my past, it happens if you don’t carefully watch those screws and lengths.

A close up of the fin density shows about a 15 FPI single fin type density.  Typically slim radiators have slightly more dense fins since they have less thickness for the fans to overcome.

And a close up of the fins quality shows some irregularity, but generally good.  It’s fairly normal to have some irregularity on fin spacing.

No shroud stamp

Box shaped plenum chamber means there is some sort of divider within.  Standard G1/4 threading for a variety of barbs.

Pages: 1 2 3 4 5

Comments are closed.